MAKING OF PAPER
New Zealand Industry Since its inception in 1921 the Forest j Products Branch of the New Zealand j State Forest Service has been studying ■ the Pulping and Paper Making pro- ; perties of New Zealand woods, including both native and exotic species. The • results of these technical investigations were presented to the Forestry Section of the Scientists’ Congress at Auckland on Friday in a report by Mr A. R. En- ] trican, Engineer in Forest Products 1 for the New Zealand State Forests Ser- , vice. One of Mr Entrican’s most striking conclusions is that it is possible that New Zealand may become eventually a large exporter of Forest produce including both pulp and paper. Altogether, 15 New Zealand grown woods were examined, including three native soft woods, four introduced soft woods and eight native hard woods. Of the soft woods, Insignis Pine and Kahikatea yielded strong, but somewhat creamy ground wood pulps, sulphate pulps of fairly good colour, and strong sulphate pulps for wrappings, etc. Rimu, too, yielded by the sulphate and soda processes, a good grade of “kraft” stock, and although only a soda “kraft” pulp has been produced from kauri, just as good a product should be obtainable by the sulphate process.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/THD19300805.2.88
Bibliographic details
Timaru Herald, Volume CXXV, Issue 18637, 5 August 1930, Page 12
Word Count
205MAKING OF PAPER Timaru Herald, Volume CXXV, Issue 18637, 5 August 1930, Page 12
Using This Item
Stuff Ltd is the copyright owner for the Timaru Herald. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.