A "BUNNY" TURBAN
WITH A MATCHING SCARF Here is an attractive little "bunny" turban with matching scarf which you can easily make yourself. Angora wool or velvet, in two pretty colours, would be a good choice. Deep caramel beige combined with black is new.
' Half a yard of material in each colour is needed, For the scarf cut off a piece from each measuring Bin. by 36in. and shape the ends by cutting off one corner. Line one piece with the other. Make a paper pattern for the cap following the diagrams and pin together to fit on. A and B are the sides and are shown in relation to a 6in. square. .The sides marked with a dotted lino are joined to the long sides of the strip measuring 12in. by 4in. Then the edges of the cap are turned under and faced with narrow Petersham ribbon.
The two top pieces in the diagram are the "ears." Cut out two in black and two in boigo, using one of each colour as a, lining. Join them together by the short sides with contrasting colours uppermost and cover tho join with a two-coloured strip drawing it into folds. Stitch tho curves round the front of the cap. An elastic across tho back will hold the cap (irmly on the head.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/NZH19370511.2.7.7
Bibliographic details
New Zealand Herald, Volume LXXIV, Issue 22725, 11 May 1937, Page 4
Word Count
220A "BUNNY" TURBAN New Zealand Herald, Volume LXXIV, Issue 22725, 11 May 1937, Page 4
Using This Item
NZME is the copyright owner for the New Zealand Herald. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons New Zealand BY-NC-SA licence . This newspaper is not available for commercial use without the consent of NZME. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Acknowledgements
This newspaper was digitised in partnership with Auckland Libraries and NZME.
Log in