Page 18 Advertisements Column 2

Press, 13 May 1987, Page 18

>C\WJD INVESTMENT vu FUND Professionally managed by Government Life. Single sum deposits or regular savings plan for retirement. Excellent past record. Low risk approach. RETURNS ARE FULLY TAX PAID. ‘A MOST ATTRACTIVE INVESTMENT OPPORTUNITY ““ " uhRA¥

SEND) IDOLS IMPORTANT INFORMATION READ IMMEDIATELY SN2, SFH2, SN4 NAILERS AND AST4 STAPLERS COULD INADVERTENTLY DISCHARGE A FASTENER. IF THE TOOL HAS NOT BEEN PROPERLY MAINTAINED. READ CAREFULLY AND TAKE THE ACTION TOOLS TO BE RETROFITTED: - If you currently own or use any SN2, SFN2, SN4. qr A$T4 models with serial numbers f rom72iQoool tfirouah 83399999 and all tools whose serial nTOreendsjn H, yourtQOl(s ) MAY NEED TO BE No other Senco® tool models are involved in this retrofit. Not all the tools within the models identified above could unexpectedly discharge a fastener. In fact, there is a very low probability that any of these tools will do this. However, Senco urges you to follow the instructions in this Bulletin to avoid even the possibility that an unexpected discharge could occur and that someone may be hurt. IDENTIFYING THE TOOLS TO BE RETROFITTED: - The eight-digit tool serial number is stamped into each tool housing on the left-hand side of the housing just below the handle. The model number is also stamped in the same location. - If the first two digits are 72 to 82 inclusive and the third digit is 1 to 9 inclusive or A, B, C, or if the first three digits are 831,832 or 833, your tool may need to be retrofitted. - If the serial number ends in H, your tool may need to be retrofitted. RETROFITTING INSTRUCTIONS Able Staples will check and retrofit your tools if necessary FREE OF CHARGE. This will require 10 minutes or less. Do not delay. Bring your tool(s) to the nearest Able Staples service centre now. M HI ■■ ABLE STAPLES («) LTD. fr 1 Durham* Stanley Sts, Sydenham Christchurch. *■■■■■ Phone: (03)82087 k 4836 ; A. ;