FLOOR SURFACING.
A new floor hardly requires any professional attention to make it fit to dance upon. Half a day's work will give it an excellent surface. It will have to be polished -with a mixture of sawdust and ready-prepared sterene wax—about two cups of sterene to a buck* of sawdust. The sawdust, which can be got from any timber mills, should not be oily. Work the wax well into it. and throw this mixture on the floor Tbea put a few brick* in a box, wrap the box m a blanket, attach it to a rope, and polish the floor by dragging *be box up and down. The dancers themselves will do much to work the mixture into the floor with their feet Throw down a lew handf ula of it before the dance. If the floor is old, warped and uneven, it will need to b» planed Wlt ? •» electric machine by a floor •nrfaeing company.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/AS19270924.2.201
Bibliographic details
Auckland Star, Volume LVIII, Issue 226, 24 September 1927, Page 24
Word Count
157FLOOR SURFACING. Auckland Star, Volume LVIII, Issue 226, 24 September 1927, Page 24
Using This Item
Stuff Ltd is the copyright owner for the Auckland Star. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Acknowledgements
This newspaper was digitised in partnership with Auckland Libraries.