CUTTING LAYOUT FOR THE NEW COVER Fig. 5-Layouts for cutting out the cover for the chair illustrated from 48in. and 30in. materials. For this layout the 48in. material would require to have no pattern. If the material had a big pattern, the pieces C and D would have to be turned round as with the 30in. material. In practice, with the 30in. width the shaded pieces would not be cut off but would be left until the cover was being fitted on to the chair.
Permanent link to this item
https://paperspast.natlib.govt.nz/periodicals/NZJAG19490415.2.49.9
Bibliographic details
New Zealand Journal of Agriculture, Volume 78, Issue 4, 15 April 1949, Page 430
Word Count
85CUTTING LAYOUT FOR THE NEW COVER Fig. 5-Layouts for cutting out the cover for the chair illustrated from 48in. and 30in. materials. For this layout the 48in. material would require to have no pattern. If the material had a big pattern, the pieces C and D would have to be turned round as with the 30in. material. In practice, with the 30in. width the shaded pieces would not be cut off but would be left until the cover was being fitted on to the chair. New Zealand Journal of Agriculture, Volume 78, Issue 4, 15 April 1949, Page 430
Using This Item
Stuff Ltd is the copyright owner for the New Zealand Journal of Agriculture. You can reproduce in-copyright material from this journal for non-commercial use under a Creative Commons BY-NC-SA 4.0 International license. This journal is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this journal, please refer to the Copyright guide.
Log in