Article image
Article image

THERE'S NOTRACTOR QUTEUKETHE 306 / 70-H.R Chamberlain** Champion 306, available a* Standard Linkage or All Purpose Tractor, bring* a now six cylinder emeothnoH to the medium horsepower tractor das*. The new six cylinder, heavy-duty Perkin* 6/306 engine give* th* Champion 306 70 horsepower at 2,000 r.p.m. 306 cubic inch capacity 211 lbs ft torque at 1,000 r.p.m. Power for th* heaviest load*! Champion 306 feature* a new nine-speed transmission unit built for strength and ease of service, with on-the-move gearshift and a range of gear* from 1.5 to 24.9 m.p.h. A gear speed for every |obl Simple in concept and rugged in design, this new, smooth transmission give* dependable service and long operating life with a high standard of quietness in operation. LOOK AT THESE FEATURES (available in both models): • New primary gearbox is built big, rugged with high capacity bearings, shafts and gears ... barrel shaved gears and a new wet spline design on output shafts moans quiet, smooth operation. The P.T.O. drive train is a new heavy-duty assembly which ensures complete dependability. • New main frame is a seamless 6” x 3" rectangular hollow section which provides a solid foundation into which the engine and transmission are installed. • Now secondary ratio gearbox, features barrel shaved fine pitch gears which give ewiet, smooth operation and long operating Me... the ratio change lever is conveniently located at the driver's left hand. • Now cKsc/band brakes are fully energised in both forward and reverse directions of travel. They provide positive, controlled stopping power, and can be latched to act as a parking brake. • Now P.T.O. transmission shaft is complete with an advanced rubber muff arrangement which absorbs torsional vibrations, and ensures silent operation. • Naw final drives are contained within rigid one-piece housings, which provide great strength and also facilitate service, bullgears are forged from nickel molydenum, and are splined to new design axles forged complete with integral hubs. • Now deferential assembly with high capacity crown wheel and pinion is oversize in every part. This massive unstressed assembly works easily... ensures long life. • New design P.T •O. is a multi-plate oil immersed type for high capacity and smooth engagement. Th* splined shaft is to th* A.S.A.E. standard of 1W 65. Shaft speed is 540 r.p.m; at an engine speed of 1600 r.p.m. AMD THIS EQUIPMENT (available in both models): • Deep, luxurious foam rubber comfort seating for two persons, is standard equipment on Champion 306 the seat is adjustable for your convenience. • Complete access to engine, radiator and batteries is provided by th* functional full width and length hinged hood, making daily maintenance simple. Air cleaning and screening equipment is conveniently located. • New, dry-type air risen er, complete with pre-screener and pre-deonor, provides maximum engine protection with a bare minimjm of maintenance requirements. Vacuator eject* happed dust fr xn the bowl automatically. • All-weather cab, available as an optional exha, is totally enclosed and snug for winter conditions. Roll-up rear panel, hinged windscreen, removable doors and side curtains ensure maximum ventilation and comfort in summer. • Large 15.4 x 30 x 6-ply rear tyre* are mounted on wide base steel rim* and heavy cost centres. This new larger tyre equipment combined with up to 10,000 lbs operating weight, optimum weight distribution and adjustable drawbar hitch positions, ensures positive weight transfer enables Champion 306 to effectively use its great power. • Th* New Chamberlain 306 Standard Tractor equipment includes th* traditional Chamberlain sprung front axle design for a smooth, safe rid* under ail conditions. 18.4 x 30 x 6-ply rear tyres. Fixed wheel hack. Single-acting 3-paint linkage incorporating draft and depth control and double-acting hailing hydraulic adaptor. Heavy duty power assisted steering is available as exha equipment. • Th* New Chamberlain 306 All Purpose Tractor equipment includes 18.4 x 30 x 6-ply rear tyres as standard, with option of 14.9 x 38 x 6-ply tyres. Wheel hack adjustable from 54” - 78". Single-acting 3-point linkage incorporating draft and depth control and double acting hailing hydraulic adaptor. Heavy duty power assisted steering CAM YOU AFFORD TO SETTLE FOR LESS? QUALITY IS A BARGAIN! Distributed by> FREDERIC W. SMITH LTD LS Main Road, Hamby, Christchurch. ’ Phong 497-056. I —1 HEAD OFFICE: to host so, mt sosxiu. Auckland. fr—-- I SXAHOe AT HAMarON, SAUMSSTON HOSTH WELUNatOH. MAW & HELLEWELL LTD, ASHBURTON. TIMARU TRACTOR SERVICES, TIMARU. WAIMATE MOTOR GARAGE, WAIMATE.

This article text was automatically generated and may include errors. View the full page to see article in its original form.
Permanent link to this item

https://paperspast.natlib.govt.nz/newspapers/CHP19690514.2.213.1

Bibliographic details

Press, Volume CIX, Issue 31987, 14 May 1969, Page 23

Word Count
712

Page 23 Advertisements Column 1 Press, Volume CIX, Issue 31987, 14 May 1969, Page 23

Page 23 Advertisements Column 1 Press, Volume CIX, Issue 31987, 14 May 1969, Page 23