Article image
Article image

The desire for freshness and change may be economically satisfied, in part at least, by a fresh coat of paint. Coloured paint on walls, woodwork, and furniture can give an entirely new atmosphere to a room, and can be successfully applied by anyone who follows painting directions. Two coats of paint are usually enough to cover wood which has been painted before . The first or priming coat should be of the same kind of paint as that used for the second coat but should be thinned with one-half as much turpentine as paint. This first coat should be allowed to dry at least twenty-four hours. When dry, the paint should be sanded lightly, with extreme care not to rub the paint off the edges before applying the second, or last, coat. A good paint job can be obtained only by using good tools. It pays to buy a good brush and to keep the brush in good condition. A new brush should have the dust worked out before using it, and should be used first on the priming coat, not on a final coat, so that by the time the final coat is ready to be applied, all dust will be removed from the brush.

This article text was automatically generated and may include errors. View the full page to see article in its original form.
Permanent link to this item

https://paperspast.natlib.govt.nz/newspapers/THD19361230.2.87

Bibliographic details

Timaru Herald, Volume CXLII, Issue 20613, 30 December 1936, Page 10

Word Count
205

Untitled Timaru Herald, Volume CXLII, Issue 20613, 30 December 1936, Page 10

Untitled Timaru Herald, Volume CXLII, Issue 20613, 30 December 1936, Page 10