BED-MAKING AS AN ART
THE RIGHT WAY There is a right and a wrong way to make a bed. You should always buy sheets large enough to allow at least half a yard tuck in on all sides. First, the lower sheet is put on, with wide hem at the top and with the right side up—tucked in carefully, and with mitred corners. Comers are mitred by bringing the corner of the sheet round the corner of the mattress, box fashion. Meantime, have the side part of the sheet up on the mattress out of the way, to drop down after the diagonal corners are tucked in. Turn the tuck-in part of the corner under the side of the mattress, finishing the mitred corner; then bring down the side of the sheet under the mattress. The lower sheet is mitred at all four corners, while the upper sheet and blanket are done only at the foot. The upper sheet should be put on right side down and with wide hem at top, which brings the turn-back of the sheet right side up. This turn-back will protect the blanket. The blanket comes next to the sheet, '
and economy teaches that it is better to cut the pair of blankets apart, bind them, and use separately. Finally, throw over the bedspread and smooth out flat.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/THD19350105.2.126.4
Bibliographic details
Timaru Herald, Volume CXXXIX, Issue 19999, 5 January 1935, Page 16
Word Count
223BED-MAKING AS AN ART Timaru Herald, Volume CXXXIX, Issue 19999, 5 January 1935, Page 16
Using This Item
Stuff Ltd is the copyright owner for the Timaru Herald. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.