BRAKE RATTLES.
On cars fitted with mechanically operated brakes of the type controlled by rods, looseness at joints in the rods proves to be a prolific source of rattle, which cannot be checked either by lubrication or by adjustment. A simple method of minimising this rattle is to secure a strong rubber band over each junction point in such a way as to hold firmly together adjacent metal parts whose loose contact gives rise to the rattle. This simple method of securing the units of the mechanism in firm contact is proof against all ordinary vibration. Although it may grip the metal parts quite tightly, the rubber will not 'noticeably increase the pressure required to apply the brakes, and it cannot in any way impair their efficiency. It should be remembered that as they are exposed to dust and water, and probably extreme temperature changes beneath the car, the rubber bands will perish fairly quickly. They should therefore be replaced about every three months. Suitable bands can be purchased so cheaply that the cost of replacement is negligible.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/KCC19330523.2.14.11
Bibliographic details
King Country Chronicle, Volume XXVII, Issue 4396, 23 May 1933, Page 3
Word Count
178BRAKE RATTLES. King Country Chronicle, Volume XXVII, Issue 4396, 23 May 1933, Page 3
Using This Item
Waitomo Investments is the copyright owner for the King Country Chronicle. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Waitomo Investments. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.