SKIM MILK WHITEWASH
♦ Use a mixture of white lime and cement. Fill a big drum to a third of its capacity with unslaked lime and add water in small quantities, to slake the lime. Cover up with a bag and let sand till the next day. Then take some of this lime and add to it an equal quantity of cement, mixing the two thoroughly. Thin down with skim milk, and run through a sieve to take out coarse stuff, if any. Water, in which seme salt has been dissolved, can be added before the wash is applied. The mixture must be stirred well when it is being thinned down to the required consistency. The function of the skim milk is to help the wash to “stick” to the wall, and the salt helps to harden it. Cement by itself is liable to peel off. When slaking white lime one must he careful not to add the water all at once. When slaking, the lime expands and great heat is generated. Sometimes this heat is used to melt tallow or paraffin wax. which is mixed with the unslaked lime, the tallow being put in to make the wash smooth, and to assist it to stick to the wall. The skim milk is then not used.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/CHP19361112.2.55
Bibliographic details
Press, Volume LXXII, Issue 21938, 12 November 1936, Page 10
Word Count
215SKIM MILK WHITEWASH Press, Volume LXXII, Issue 21938, 12 November 1936, Page 10
Using This Item
Stuff Ltd is the copyright owner for the Press. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Acknowledgements
This newspaper was digitised in partnership with Christchurch City Libraries.