can get your material wide enough to take the width of the chair, this will simplify matters. Lay the material over the chair, pin to prevent slipping, aiid cut to your shape. Now pin up
where the seams for piping are to come, as in Fig. 3. Then tack these seams with strong thread as shown in Fig. 4. Unpin the cover from the chair, slip off, and pipo in the nsual way. If you
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/AS19280331.2.213.10.3
Bibliographic details
Auckland Star, Volume LIX, Issue 77, 31 March 1928, Page 4 (Supplement)
Word Count
75can get your material wide enough to take the width of the chair, this will simplify matters. Lay the material over the chair, pin to prevent slipping, aiid cut to your shape. Now pin up where the seams for piping are to come, as in Fig. 3. Then tack these seams with strong thread as shown in Fig. 4. Unpin the cover from the chair, slip off, and pipo in the nsual way. If you Auckland Star, Volume LIX, Issue 77, 31 March 1928, Page 4 (Supplement)
Using This Item
Stuff Ltd is the copyright owner for the Auckland Star. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Acknowledgements
This newspaper was digitised in partnership with Auckland Libraries.