Page image

11

fl.—lsa.

No. 3.—Return of Notices given to repair Boilers— continued.

Number. Type. Description of Repairs. 1 Dryback marine ... Crown of back ring of furnace patched and strengthening angles fitted to both furnace-rings. Defective patch renewed, and girder fitted on furnace. Girder fitted on back ring of furnace. Patch on back tube-plate renewed. Eetubed. Several tubes renewed. Strengthening girders fitted to crown of furnace. Twelve screwed stays fitted between furnace and shell. Adamson's welts on both furnaces at front end renewed. Brickwork repaired. Eleven turned bolts fitted in gusset stay. Four turned bolts fitted in gusset stay. Patch fitted on front right-hand side of furnace. Several new rivets put in back circumferential seam and eight in second seam from front. Twenty-two rivets renewed in furnace and door angle plates, one Galloway tube patched, and new neck for blowdown pipe fitted. Eetubed. Eetubed, and patches fitted round front of boiler and furnace-rings. Compensating-rings fitted round two mudhole-openings, and patch in firebox renewed. Cracked portion of shell (2 ft. long) cut out, and patch fitted. Eight new tubes fitted. Firebox repaired at foundation-ring. New rivets put in door-ring and six new rivets in tube-plate. New tapered plug fitted in front tube-plate. One new longitudinal stay fitted. Patch fitted in firebox under firedoor, and twelve new screwed stays fitted. Patch fitted on front tube-plate. Patch fitted on throat-plate. Patches renewed. Eetubed. Eetubed, new tube-plates and new front plate fitted. Eetubed, patch fitted on throat-plate, and patch on bottom left-hand corner of firebox. Several new screwed stays fitted in firebox. Three new rivets put in firebox. Twenty-eight new tubes fitted. Twenty-four new screwed stays fitted in firebox. Two new tubes fitted. A number of rivets renewed. New internal tube fitted. Top and bottom seams recaulked. Bottom of combustion-chamber renewed, and patch riveted on front of shell. Patch fitted on front end under bottom of shell and into mouth of furnace. Patch fitted on side of combustion-chamber. Eetubed, and new manhole-door fitted. Bolted patch fitted on top of boiler under safety-valve chest. Bottom circumferential seams recaulked. Bottom flange of back tube-plate reriveted. Brickwork repaired. Bulge cut out of bottom of shell, and patch riveted on. Bulge cut out of bottom of shell, new mud-leg fitted, and thirty-six new tubes fitted. Centre plate in bottom of shell cut out and renewed. Compensating-rings fitted round manhole-openings. Compensating-rings fitted round mudhole-openings. Compensating-ring fitted round mudhole-opening and extending over the feed-inlet. Compensating-ring fitted round mudhole-opening, and four turned bolts fitted in gusset stay. Defective steam-dome removed, and plate riveted on shell of boiler. Laminated plate cut out of bottom of boiler, and riveted patch fitted. Longitudinal seams at back end caulked, and washer fitted on tubeplate where wasted. 1 1 1 3 1 2 1 1 1 1 1 1 1 n • • • it — it it it it it Lancashire // ... a tt a 1 it 2 1 1 Lancashire tubular Locomotive 1 1 1 1 1 1 1 it it • • • tt a • • • it a 1 1 3 3 1 1 a • • • a a 6 1 1 1 1 1 1 1 1 a it Manure-dryer it it Marine ... 1 a 1 1 2 1 1 21 2 1 a • • • Multitubular a a 1 6 11 1 it a ■ • • 1 a 1 1 1 i i

Log in or create a Papers Past website account

Use your Papers Past website account to correct newspaper text.

By creating and using this account you agree to our terms of use.

Log in with RealMe®

If you’ve used a RealMe login somewhere else, you can use it here too. If you don’t already have a username and password, just click Log in and you can choose to create one.


Log in again to continue your work

Your session has expired.

Log in again with RealMe®


Alert