DO YOU KNOW?
The oil-cans with which engineers and mechanics oil their machinery have a long tapering spout, and just in front of the handle there is a button which can be pressed down with the thumb, but rises directly the thumb is removed. The press button moves a rod which is attached to a valve at the entrance to the spout. In the ordinary way this valve closes the opening, but when it is desired that the oil shall escape through the spout the pressing of the button opens the valve. The spring attached to the connecting rod causes the button to rise when the pressure of the thumb is removed. The mechanism varies in different forms of cans, but the principle is the same, namely, the opening and closing of a valve. If the can should fall or be knocked over the closed valve prevents j the oil running out and being wasted '
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/AS19270226.2.181.7
Bibliographic details
Auckland Star, Volume LVIII, Issue 48, 26 February 1927, Page 25
Word Count
155DO YOU KNOW? Auckland Star, Volume LVIII, Issue 48, 26 February 1927, Page 25
Using This Item
Stuff Ltd is the copyright owner for the Auckland Star. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons BY-NC-SA 3.0 New Zealand licence. This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Acknowledgements
This newspaper was digitised in partnership with Auckland Libraries.